Volga from Croatia

How did you find your boat? What are your experiences with it? Did you restore it yourself? Pictures please!
Post Reply
Posts: 1
Joined: Tue Apr 27, 2021 5:28 pm

Volga from Croatia

Post by Riko » Tue Apr 27, 2021 9:41 pm

Hello everyone! I am new to this forum and I present to you my volga for the transport of tourists in Croatia. The engine is mercedes om606 and zf v drive. Can you help me in choosing a propeller for this boat, I have 3 original volga propellers that should give balancing I'm not sure if the different dimensions should be checked. Do you know anyone for information on which large propellers are installed and on which engines? Or does anyone know which propeller would be ideal for this engine?

Posts: 100
Joined: Fri Jul 30, 2010 11:11 pm
Location: Near Amsterdam

Re: Volga from Croatia

Post by Mark » Sun May 02, 2021 8:00 pm

Hello Riko!


There were 3 main props on the Volga:
Prop nr 1:
- Diameter 350 mm
- Stap 595 mm
- Stepping-ratio 1,7
- Links

Prop nr 2:
- Diameter 335 mm
- Stap 560 mm
- Stepping-ratio 1,67

Prop nr 3
- Diameter 335 mm
- Stap 538 mm
- Stepping-ratio 1,61
If you have a stock 606 you have 180HP.
More than enhough for the V8 prop, that is prop Nr 1
That is "slower" on foil but beter for long range trips.
Small ones are faster on foils but little slower. beter for water skiing ;-)


Flying low in your hydro
find me on facebook:mark van Rijzen,
Or instagram: thedutchhydrofoiler.

Post Reply