Needing information on the foil to ? Anti corrosion mounted transistors

General hydrofoil related questions, comments, tips, etc
Post Reply
Dougieloo@aol.com
Posts: 21
Joined: Sat Apr 04, 2015 12:54 pm

Needing information on the foil to ? Anti corrosion mounted transistors

Post by Dougieloo@aol.com » Sun Nov 17, 2019 4:18 pm

I am look for some info on the Transistors that attached to the foils I have measured the OMS AT 25 some of the questions I have a are

1: how many Transistors are there per foil one for foil or two per foil

2: I know that one of the leads attach to the foil bolt but not sure we’re the other side attaches to. Any pictures
CFB69B83-69C2-42DC-9456-798DE8D742E6.jpeg
Picture of original foil anti-corrosion Transistor
would be great or any information

3: can I use a new style Transistor compared to the old original style transistor picture of the original transistor below

Mark
Posts: 97
Joined: Fri Jul 30, 2010 11:11 pm
Location: Near Amsterdam
Contact:

Re: Needing information on the foil to ? Anti corrosion mounted transistors

Post by Mark » Thu Jan 30, 2020 8:55 pm

euh i have never seen this..
I followed the specs from the Volga manual I found online.


Mark
Flying low in your hydro
find me on facebook:mark van Rijzen.

Dougieloo@aol.com
Posts: 21
Joined: Sat Apr 04, 2015 12:54 pm

Re: Needing information on the foil to ? Anti corrosion mounted transistors

Post by Dougieloo@aol.com » Thu Feb 13, 2020 8:16 am

hi Mark thank you this is the original they came with the boat

Mark
Posts: 97
Joined: Fri Jul 30, 2010 11:11 pm
Location: Near Amsterdam
Contact:

Re: Needing information on the foil to ? Anti corrosion mounted transistors

Post by Mark » Wed Feb 26, 2020 10:43 am

This is what I used as guideline.
and with magnesium not Alu anodes.
anodes.jpeg
anodes.jpeg (105.12 KiB) Viewed 1397 times
Flying low in your hydro
find me on facebook:mark van Rijzen.

Post Reply