I am look for some info on the Transistors that attached to the foils I have measured the OMS AT 25 some of the questions I have a are
1: how many Transistors are there per foil one for foil or two per foil
2: I know that one of the leads attach to the foil bolt but not sure we’re the other side attaches to. Any pictures would be great or any information
3: can I use a new style Transistor compared to the old original style transistor picture of the original transistor below
Needing information on the foil to ? Anti corrosion mounted transistors
-
- Posts: 30
- Joined: Sat Apr 04, 2015 12:54 pm
Re: Needing information on the foil to ? Anti corrosion mounted transistors
euh i have never seen this..
I followed the specs from the Volga manual I found online.
Mark
I followed the specs from the Volga manual I found online.
Mark
Flying low in your hydro
find me on facebook:mark van Rijzen.
find me on facebook:mark van Rijzen.
-
- Posts: 30
- Joined: Sat Apr 04, 2015 12:54 pm
Re: Needing information on the foil to ? Anti corrosion mounted transistors
hi Mark thank you this is the original they came with the boat
Re: Needing information on the foil to ? Anti corrosion mounted transistors
This is what I used as guideline.
and with magnesium not Alu anodes.
and with magnesium not Alu anodes.
Flying low in your hydro
find me on facebook:mark van Rijzen.
find me on facebook:mark van Rijzen.
-
- Posts: 30
- Joined: Sat Apr 04, 2015 12:54 pm
Re: Needing information on the foil to ? Anti corrosion mounted transistors
Thank you Mark
So do I attach a wire between the magnesium sacrificial zinc to the ss foil using the 25 OM transistor ??
Another Question would be is there one transistor per foil or two there is two mag. Sacrificial zincs per foil mounted in the magnesium hull and then another 2 sinks of some kind mounted on the the foil it’s self any hint as to the type of sink that is attached to the Ss foil ?
So do I attach a wire between the magnesium sacrificial zinc to the ss foil using the 25 OM transistor ??
Another Question would be is there one transistor per foil or two there is two mag. Sacrificial zincs per foil mounted in the magnesium hull and then another 2 sinks of some kind mounted on the the foil it’s self any hint as to the type of sink that is attached to the Ss foil ?
-
- Posts: 30
- Joined: Sat Apr 04, 2015 12:54 pm
Re: Needing information on the foil to ? Anti corrosion mounted transistors
as noted in the picture on the bolt for holding the zinc one can see a wire lug #2 ???